Downloading and Navigating the App¶
Overview¶
The Keilton+autani mobile app is your central interface for commissioning, configuring, and controlling your lighting system. This article covers how to download the app, grant necessary permissions, and navigate its main features.
Downloading the App¶
The Keilton+autani app is available for both iOS and Android. For direct App Store / Google Play links — plus the Keilton+autani Pro and Spiral Engineering apps — see Download the App.
Note
The app supports most Android smartphones; some models may not be supported due to hardware or firmware limitations. After installing, enable auto-updates in your app store so you always have the latest features and fixes.
Required Permissions¶
The app requires the following permissions to function properly:
| Permission | Purpose |
|---|---|
| Bluetooth | Essential for communicating with lighting devices |
| Camera | Enables QR code scanning for zone access |
| Photos/Storage | Allows saving QR codes to your photo album |
When prompted, allow these permissions. The app does not collect private data.
Before You Begin Commissioning¶
For the best experience, ensure:
- Your device has Bluetooth 4.2 or later
- Camera access is allowed for QR code scanning
- Photo access is allowed for saving QR codes
- Lighting fixtures are powered on
- You use only one device during commissioning (using multiple devices may cause data corruption)
The Five Main Pages¶
The app has five main tab pages located in the bottom navigation bar.
Lights Page¶
The primary page for viewing and controlling individual fixtures. Here you can:
- See all lights connected to the current zone
- Turn lights on and off
- Adjust brightness and color temperature
- Access individual light settings
Groups Page¶
Create and manage groups of lights. Use this page to:
- Create new groups
- Add or remove lights from groups
- Control all lights in a group together
- Configure group-level settings
Discover Page¶
Add and configure switches, area sensors, and other devices. The Discover page has a selector at the top with these tabs:
- Switches – Add and manage wall switches
- Area Sensors – Add and configure ceiling sensors
- Devices – Add and manage non-lighting devices (energy dongles, emergency controllers, bridges, signal boosters, etc.)
From here you can:
- Add new switches
- Add and configure ceiling sensors
- Add other devices (CR01, PPA109S, CR04, BG01, RP0) to your zone
- Access switch, sensor, and device settings
Scenes Page¶
Create and manage preset lighting configurations. This page allows you to:
- Create new scenes
- Define light levels for each scene
- Activate scenes with a single tap
- Edit or delete existing scenes
More Page¶
Video Tutorial
Watch the companion video Chapter 8: Features and Functions of the More Page for a visual walkthrough of these steps.
Access additional settings and features including:
| Feature | Description |
|---|---|
| Schedule | Set timed events for lights, groups, and scenes |
| My Zones | Create, edit, delete zones; manage QR codes |
| Force Sync | Manually sync data to the cloud |
| Circadian Rhythms | Enable/disable circadian lighting |
| Light Info | View information on all connected devices |
| Nearby Lights | See all online lights in range |
| Motion Sensor Testing | Test sensor functionality |
| Auto Calibration | Calibrate daylight harvesting |
| Trim Settings | Adjust high and low trim levels |
| Disable Bluetooth Radio | Disables Bluetooth for the devices (typically reserved for flashnet commissioning) |
Understanding Light Status Icons¶
On the Lights page, each fixture displays an icon indicating its current state:
| Icon State | Meaning |
|---|---|
| Auto-off | Light is off; will turn on automatically when motion is detected |
| Auto-on | Light is on and operating in automatic mode |
| Manual-off | Light is off and will stay off until manually changed or scheduled event |
| Manual-on | Light is set to a manual level via scene or command; returns to auto after sensor delays |
| Offline | Controller is not receiving power or is out of mesh network range |
| Blue Name | This light is the connection point between your phone and the mesh network |
All Lights Toggle¶
A default "All Lights" control provides a full system on/off switch, toggling all lights in the zone between auto-on and manual-off states.
Quick Reference¶
| To Do This | Go Here |
|---|---|
| Control a single light | Lights page → Tap light icon |
| Adjust light settings | Lights page → Long press light icon |
| Create a group | Groups page → Tap "+" button |
| Add a switch or sensor | Discover page |
| Add a device (CR01, PPA109S, CR04, BG01, RP0) | Discover page → Devices → Tap "+" button |
| Create a scene | Scenes page → Tap "+" button |
| Add a schedule | More page → Schedule |
| Manage zones | More page → My Zones |
| Check light status | More page → Light Info |
| Check device status | Discover page → Devices |