Skip to content

Setting Schedule Date, Time, and Repeat

Overview

After creating a schedule and associating it with lights, groups, or scenes, you need to configure when it runs. This article covers setting the time, creating one-time schedules, and configuring repeating schedules.

Accessing Time Settings

  1. On the schedule editing page, tap Set time.
  2. The time configuration page opens.

Setting the Time

Step-by-Step Instructions

  1. Use the time picker to select hours and minutes.
  2. Choose AM or PM.
  3. The schedule will execute at exactly this time.

Time Accuracy

For reliable schedule execution:

  • Install a CR01 or CR02-W dongle for real-time clock functionality — either one provides a battery-backed clock that keeps time through a power outage
  • Ensure the app syncs with the zone periodically
  • Without an RTC dongle, schedules depend on the mesh network's time reference

Which dongle?

All three carry a battery-backed real-time clock. Choose on the other capabilities:

  • CR01-ETC — Energy Monitoring and Real-Time Clock. Choose this if you also want energy reporting.
  • CR01-RTC — Real-Time Clock only. The lower-cost choice when you need accurate scheduling and nothing else.
  • CR02-W — Long-Range RTC, IP65 outdoor, and adds astronomical sunrise/sunset scheduling. Choose this for outdoor sites or solar-time schedules.

See Energy-Monitoring & RTC Dongles.

One-Time Schedules

One-time schedules run once on a specific date, then become inactive.

Configuration

  1. Leave the Repeat toggle disabled.
  2. Select the specific date when the schedule should run.
  3. Set the execution time.
  4. Tap Done.

Use Cases

Scenario Example
Special events Holiday party lighting
Temporary needs Contractor work lighting
Specific dates Annual inspection prep
Seasonal changes Daylight saving adjustments

Repeating Schedules

Repeating schedules run on selected days every week.

Configuration

  1. Enable the Repeat toggle.
  2. Select which days of the week the schedule should run.
  3. Tap each day to select or deselect.
  4. Set the execution time.
  5. Tap Done.

Day Selection Patterns

Pattern Days Selected Use Case
Weekdays Mon, Tue, Wed, Thu, Fri Standard office hours
Weekends Sat, Sun Weekend operations
Daily All seven days 24/7 facilities
Specific days Custom selection Part-time operations

Schedule Timing Examples

Schedule Name Time Repeat Days
Morning Startup 7:00 AM Yes Mon-Fri
Close of Business 6:00 PM Yes Mon-Fri
Weekend Security 9:00 AM Yes Sat, Sun
Holiday Party 5:00 PM No Dec 20
Daily Reset 6:00 AM Yes All days
Late Night Off 11:00 PM Yes Mon-Sun

Completing Time Setup

After configuring time settings:

  1. Tap Done on the time page.
  2. Return to the schedule editing page.
  3. Configure fade time if desired (see V41).
  4. Tap Done to save the schedule.

Time Zones and Accuracy

Considerations

  • Schedules use the zone's local time
  • CR01 dongle maintains accurate time without internet
  • App sync updates time reference when connected
  • Test schedules to verify correct execution time

Troubleshooting Time Issues

Issue Cause Solution
Wrong time execution Time not synced Add CR01 or sync app
Schedule not running Incorrect date Verify date settings
Off by hours AM/PM error Check AM/PM selection

Quick Reference

Action Steps
Set time Set time → Adjust picker → Done
One-time schedule Repeat OFF → Select date → Set time
Repeating schedule Repeat ON → Select days → Set time
Weekdays only Select Mon through Fri
Daily Select all seven days