Quick Dimming and Color Tuning
Video Tutorial: Watch the companion video V09: Quick Dimming and Color Tuning for a visual demonstration of these gestures.
Overview
The Keilton+autani app provides quick gesture controls for adjusting lights directly from the Lights page—no menus required. This article explains how to use tap and swipe gestures for fast lighting control.
Quick On/Off Control
The fastest way to control a light is a simple tap.
How to Toggle On/Off
- Navigate to the Lights page.
- Tap once on any light's icon.
- The light toggles between on and off.
The icon updates immediately to show the light's current state. This works for any light in your zone.
Quick Brightness Adjustment
Adjust brightness using a horizontal swipe gesture.
How to Adjust Brightness
- Navigate to the Lights page.
- Place your finger on a light's icon.
- Slide left to dim the light down.
- Slide right to brighten the light up.
The light responds in real-time as you slide, allowing you to find the perfect brightness level.
Tips for Success
- Use a light touch—pressing too hard may register as a tap instead
- Keep the gesture smooth and horizontal
- Watch the fixture respond as you slide
Quick Color Temperature Adjustment
For tunable white fixtures, adjust color temperature using a vertical swipe gesture.
How to Adjust Color Temperature
- Navigate to the Lights page.
- Place your finger on a tunable white light's icon.
- Slide up to shift toward cooler (bluer) tones.
- Slide down to shift toward warmer (more yellow) tones.
The fixture adjusts in real-time so you can see the effect immediately.
Color Temperature Reference
| Direction | Result | Typical CCT Range |
|---|---|---|
| Swipe Up | Cooler/Blue | 5000K – 6500K |
| Swipe Down | Warmer/Yellow | 2700K – 3500K |
Note: Vertical swipe only works on tunable white or CCT-capable fixtures. Standard dimmable lights will not respond to vertical swipes.
Gesture Summary
| Gesture | Direction | Action |
|---|---|---|
| Tap | Single quick tap | Toggle on/off |
| Horizontal swipe | Left | Dim down |
| Horizontal swipe | Right | Brighten up |
| Vertical swipe | Up | Cooler color temperature |
| Vertical swipe | Down | Warmer color temperature |
Supported Features by Fixture Type
Not all fixtures support all gestures. The table below shows which controls work with each fixture type:
| Fixture Type | Tap (On/Off) | Horizontal (Brightness) | Vertical (CCT) |
|---|---|---|---|
| Mono-dimmable | ✓ | ✓ | ✗ |
| Tunable white | ✓ | ✓ | ✓ |
| RGB | ✓ | ✓ | ✓ (color) |
| Non-dimmable | ✓ | ✗ | ✗ |
Important Considerations
Auto Mode Override
Manual adjustments using these gestures may temporarily override automatic sensor settings. The light will return to auto mode after the configured sensor delays expire.
Gesture Direction Matters
- Horizontal controls brightness
- Vertical controls color temperature
Mixing up directions may result in unexpected adjustments.
For More Precise Control
If you need finer control than gestures allow, use the advanced dimming settings page (long press on a light icon). This provides slider controls for precise adjustments.
Troubleshooting
| Issue | Solution |
|---|---|
| Tap registers as swipe | Use a quicker, lighter tap |
| Swipe registers as tap | Keep finger moving in a smooth motion |
| Vertical swipe has no effect | Fixture may not be tunable white—check fixture type |
| Light doesn't respond | Verify light is online and within mesh range |
Related Articles
- Adding Lights to Your Network
- Naming Lights and Setting Rated Power
- Advanced Dimming Settings
- Circadian Rhythm Settings
Based on Keilton+autani App User Guide v9.7