Configuring Switch Settings
Video Tutorial: Watch the companion video V30: Configuring Switch Settings for a visual walkthrough.
Overview
After adding switches to your network, you need to configure their button functions and behavior. This article explains the available settings and how to customize your switches.
Accessing Switch Settings
- Navigate to the Switches page.
- Tap on the switch you want to configure.
- Tap the Settings button in the upper right corner.
- The switch configuration panel opens.
Button Functions
Button functions vary by switch model. Some buttons have pre-defined functions that cannot be changed, while others are fully configurable.
Standard Button Functions
| Function | Behavior |
|---|---|
| On | Turns associated lights on |
| Off | Turns associated lights off |
| Dim Up | Increases brightness |
| Dim Down | Decreases brightness |
| Scene | Activates associated scenes |
Special Functions (8-Key Switches)
The additional buttons on 8-key switches can be assigned special functions:
| Function | Behavior |
|---|---|
| On | Turns lights on |
| On/Off | Toggles lights on and off |
| Off 15 min delay | Turns off after 15 minutes |
| Off 30 min delay | Turns off after 30 minutes |
| Off 1 hour delay | Turns off after 1 hour |
| Off 2 hours delay | Turns off after 2 hours |
| Off 4 hours delay | Turns off after 4 hours |
| 100% on | Sets lights to full brightness |
| 100% on/off | Toggles between 100% and off |
Timed Shutoff
Timed shutoff delays allow users to turn off lights after a specified period. This is useful for:
- End of meetings
- Leaving a space but wanting lights on temporarily
- Energy management without immediate darkness
Important Note
Timed shutoff is interrupted and canceled if you manually adjust the lights via: - The app - Another switch - A schedule
Dimming Behavior
Press vs Hold
| Action | Behavior |
|---|---|
| Quick press | Triggers preset step (e.g., 10% change) |
| Press and hold | Continuous dimming until released |
Dimming Rate
Some switches allow adjustment of how quickly lights dim when holding the button. A slower rate provides finer control; a faster rate allows quick adjustments.
Saving Configuration
- Settings are typically saved automatically
- Always test the switch after configuration
- Press each button and verify expected behavior
Synchronization Requirement
Critical: Whenever you update a group or scene associated with a switch, you must:
- Open the switch settings
- Re-save the configuration
This ensures the switch has current information and operates correctly.
Example Configuration (8-Key Switch)
| Button | Assignment |
|---|---|
| 1 | On (Auto mode) |
| 2 | Off |
| 3 | Dim Up |
| 4 | Dim Down |
| 5 | Scene cycle |
| 6 | Off 30-minute delay |
| 7 | 100% On |
| 8 | Custom / Reserved |
Troubleshooting
| Issue | Cause | Solution |
|---|---|---|
| Button not responding | Not configured | Assign function to button |
| Wrong behavior | Settings out of sync | Re-save switch settings |
| Timed shutoff not working | Interrupted by other control | Avoid adjusting during countdown |
| Dimming too fast/slow | Rate setting | Adjust dimming rate if available |
Quick Reference
| Action | Steps |
|---|---|
| Access settings | Switches → Tap switch → Settings |
| Configure button | Select button → Choose function |
| Test switch | Press each button, verify response |
| Sync after changes | Open settings → Save again |
Related Articles
- Adding and Managing Switches
- Associating Lights to Switches
- Associating Scenes and Groups to Switches
Based on Keilton+autani App User Guide v9.7