Disabling Bluetooth Radio
Video Tutorial: Watch the companion video V48: Disabling Bluetooth Radio for a visual walkthrough.
Overview
Disabling Bluetooth radio disconnects lights from the app and mesh network. This is typically used when transferring control to another system or decommissioning fixtures.
When to Disable Bluetooth
| Scenario | Purpose |
|---|---|
| BACnet integration | Transfer control to building automation |
| Zone decommissioning | Remove fixtures from active system |
| Control handoff | New management system taking over |
| Troubleshooting | Isolate network interference issues |
Important Warnings
| Warning | Impact |
|---|---|
| Irreversible via app | Cannot re-enable through app |
| Loss of control | App can no longer control lights |
| Settings preserved | Sensor settings remain in fixture |
| Reset required | Factory reset needed to restore |
Disabling Bluetooth Radio
Step-by-Step Instructions
- Navigate to More page.
- Tap Disable Bluetooth Radio.
- Read the warning dialog carefully.
- Tap Continue to proceed.
- Select which lights or groups to disable.
- Tap Disable.
- The app automatically refreshes and syncs.
After Disabling
- Selected lights are disconnected from Bluetooth mesh
- App cannot control these lights
- Lights continue operating with last settings
- Other control systems (if any) take over
Restoring App Control
To restore app control after disabling Bluetooth, you must reset the fixtures to factory settings.
Reset Options
| Method | Requirements |
|---|---|
| Power reset sequence | Physical power control access |
| FL30 flashlight reset | Must be enabled, requires photosensor |
| Delete from app | Only if still partially connected |
Power Reset Sequence
See Restoring Factory Settings for detailed instructions.
Considerations Before Disabling
| Question | If Yes |
|---|---|
| Do I need app control later? | Consider implications of reset requirement |
| Is BAS/BACnet ready? | Verify other system is operational |
| Are settings documented? | Record current configuration |
| Is this the correct zone? | Double-check selection |
Troubleshooting
| Issue | Solution |
|---|---|
| Need to restore control | Perform factory reset |
| Accidentally disabled | Factory reset required |
| Some lights still connected | Re-run disable process |
| Can't find disabled lights | Use Nearby Lights to locate |
Quick Reference
| Action | Steps |
|---|---|
| Disable Bluetooth | More → Disable Bluetooth Radio → Continue → Select → Disable |
| Restore control | Factory reset (see V51) |
Related Articles
Based on Keilton+autani App User Guide v9.7