Flashlight Reset Configuration
Video Tutorial: Watch the companion video V50: Flashlight Reset Configuration for a visual walkthrough.
Overview
The FL30 flashlight tool provides a convenient way to reset fixtures to factory settings without using a ladder or app. This feature can be enabled or disabled based on your security and maintenance requirements.
What Is Flashlight Reset?
When enabled, pointing the FL30 flashlight in strobe mode at a fixture's photosensor for 6 seconds resets the fixture to factory settings.
Requirements
| Requirement | Details |
|---|---|
| Tool | FL30 flashlight |
| Mode | Strobe mode |
| Duration | 6 seconds |
| Fixture | Must have photosensor |
| Setting | Feature must be enabled |
Benefits and Risks
Benefits
- Reset high-mounted fixtures without ladder
- No app or power control needed
- Quick maintenance operations
- Works from ground level
Risks
- Anyone with FL30 could reset fixtures
- Potential unauthorized resets
- Security concern for sensitive installations
Configuring Flashlight Reset
Step-by-Step Instructions
- Navigate to More page.
- Tap Flashlight Reset.
- Toggle the feature on or off.
- Setting applies to all fixtures in the zone.
When to Enable
| Scenario | Recommendation |
|---|---|
| Warehouse | Enable |
| Maintenance-friendly facility | Enable |
| Trusted access environment | Enable |
| High ceilings, difficult access | Enable |
| Industrial settings | Enable |
When to Disable
| Scenario | Recommendation |
|---|---|
| Secure facilities | Disable |
| Public access areas | Disable |
| Critical infrastructure | Disable |
| High-security requirements | Disable |
| Retail with customer access | Disable |
Using the FL30 Reset (When Enabled)
Procedure
| Step | Action |
|---|---|
| 1 | Set FL30 to strobe mode |
| 2 | Point directly at fixture photosensor |
| 3 | Hold steady for 6 seconds |
| 4 | Fixture resets to factory settings |
| 5 | Light flashes slowly 3 times to confirm |
Tips
- Point directly at the photosensor
- Maintain steady position
- Wait for confirmation flash
- Fixture will need recommissioning
Alternative Reset Methods
If flashlight reset is disabled, use these methods instead:
| Method | Requirements | Details |
|---|---|---|
| Power reset sequence | Power control access | See V51 |
| App deletion | Admin app access | Delete light from app |
Fixtures Without Photosensors
Fixtures without photosensors cannot be reset via flashlight regardless of this setting. Use alternative reset methods for these fixtures.
Security Best Practices
| Practice | Benefit |
|---|---|
| Disable in public areas | Prevents unauthorized reset |
| Enable only where needed | Balance convenience and security |
| Document your choice | Track configuration decisions |
| Train maintenance staff | Ensure proper tool use |
Troubleshooting
| Issue | Cause | Solution |
|---|---|---|
| Reset not working | Feature disabled | Enable in settings |
| Reset not working | No photosensor | Use alternative method |
| Reset not working | Wrong tool mode | Verify strobe mode |
| Reset not working | Too far from sensor | Move closer |
Quick Reference
| Action | Steps |
|---|---|
| Enable flashlight reset | More → Flashlight Reset → Toggle on |
| Disable flashlight reset | More → Flashlight Reset → Toggle off |
| Perform reset | FL30 strobe → Point at sensor → 6 seconds |
Related Articles
Based on Keilton+autani App User Guide v9.7